HSC 750 MG
112.000,- € net
Machine price with specified standard equipment
(Notes on our price transparency)
Our largest machine from the mineral die cast series has an 750×500 mm table size and even more axis travel.
This allows big parts, big tools, and no worries about space – even in the workshop as outline dimensions are kept on the possible minimum. But still it includes a 40 station HSK-E40 tool changer.
Standard equipment:
- T slot table with additional fitting holes 16H7 in 50/100mm grid
- Hand wheel for controlling up to 6 axis with override for feed rate and spindle rpm
- automatic tool length measurement and break detection
- joblist and zero point offset managemt
- network ready machine control for easy access and integration
- semi automatic central lubrication system
Technical data
| Feature | HSC 750 MG |
|---|---|
| Axis count | 3 |
| Travel (XYZ) | 780 mm x 550 mm x 400 mm |
| Axis of rotation | optional |
| Swivel axis | optional |
| Mounting surface (XY) | 750 mm x 500 mm |
| max. table load | 350 kg |
| Diffuser height Z | 450 mm |
| max. speed | 15 m/min |
| Spindle and tools | |
| Speed range rpm | 3.000 – 32.000 |
| Spindle power (water cooled) | 6kW (S1-100%), 9kW (S6-40%) |
| Tool clamping | HSK-E40 |
| Tool changer | 40-fach |
| max. length from lower edge of spindle cone | 180 mm |
| max. tool length (depending on collet length) approx. | 110 mm |
| Dimensions (XYZ) | 1800 mm x 1600 mm x 2170 mm |
| Table load | 3500 kg |
| Compressed air connection | 6-7 bar |
| Connected load | 3×400 V / 32 A |
| Power | 15 kVA |