HSC 1000 MG
99.000,- € net
Machine price with specified standard equipment
(Information on Our Price Transparency)
Our largest machine from the mineral die cast series has an 600×1000 mm table size and even more axis travel.
This allows for large parts and tools without worrying about space, even in the workshop, as the external dimensions are kept to a minimum. But still, it includes a 40 station HSK-E40 tool changer.
Standard equipment:
- T slot table with additional fitting holes 16H7 in 50/100mm grid
- Hand wheel for controlling up to 6 axis with override for feed rate and spindle rpm
- automatic tool length measurement and break detection
- joblist and zero point offset managemt
- network ready machine control for easy access and integration
- semi automatic central lubrication system
Technical data
| Feature | HSC 1000 MG |
|---|---|
| Axis count | 3 |
| Travel (XYZ) | 640 mm x 1020 mm x 380 mm |
| Axis of rotation | optional |
| Swivel axis | optional |
| Mounting surface (XY) | 600 mm x 1000 mm |
| max. table load | 350 kg |
| Diffuser height Z | 370 mm |
| max. speed | 20 m/min |
| Spindle and tools | |
| Speed range rpm | 3.000 – 32.000 |
| Spindle power (water cooled) | 6kW (S1-100%), 9kW (S6-40%) |
| Tool clamping | HSK-E40 |
| Tool changer | 40x |
| max. length from lower edge of spindle cone | 180 mm |
| max. tool length (depending on collet length) approx. | 110 mm |
| Dimensions (XYZ) | 1800 mm x 1600 mm x 2170 mm |
| Table load | 1650 kg |
| Compressed air connection | 6-7 bar |
| Connected load | 3×400 V / 32 A |
| Power | 15 kVA |